Instructions


Storage Instructions
(Moulded Panel Doors and Flush Doors)
  • Store in a cool and dry place.
  • Select balanced level ground for stacking.
  • Prepare balanced stack, size by size, 3 feet equal size, and support at ground level to place the door horizontally.
  • Cover the stack with plastic sheet.
  • Do not place / store any other material over the door.
  • Do not stack in warm temperature area, under cement/steel sheet roof, as it may cause severe warping on the door.
  • Fit the door after completing the wet area work and after cleaning the floor at site.
  • To fix screws and hinges as per thickness and size of the door, consult an architect or hardware
    expert.
  • Lock: Tubular type advisable (for mechanical strength)
  • Immediately on receipt of the flush doors, apply primer coat on the entire door, edges as well as the surface, to avoid moisture attack and warping.
  • You should plan the delivery of your doors based on your readiness to install them on site. By doing so, you can avoid damage to the doors due to unsuitable storage conditions at site.
Finishing Instructions
(Moulded Panel Doors)
  • Doors are delivered pre-primered (white).
  • Sanding/ lapi/ putti not required.
  • Clean the surface gently by wet cloth and allow drying. Then apply 2-3 coats of good quality paint
    of desired color.
  • Door can be stainer-finished with the help of a sealer which may be applied before stainer with a
    spray gun, allowing it to dry overnight. Do consult the stain manufacturer before the procedure.
  • For extra water resistance polyurethane/ touchwood coat is recommended, especially in the balcony,
    bathroom and toilet door application.
  • The original door should not be tampered with.
NOTE:
  • To keep the warranty intact within a given period of time, the original door should not be tampered with.
  • Moulded Panel doors are especially meant for interior use only.
  • Raw materials, sizes and designs are subject to availability.
  • Due to continuous R & D the mentioned specifications are subject to change at anytime without any prior
    notice.
  • Doors made from natural material may deviate from specifications due to the basic nature of natural raw
    material and climatic effects.
  • Images printed in the catalogue are for the purpose of reference. Actual PVC sheets, colors, shades and
    grains may vary.
   Home \ About Kalpataru \ Our Doors \ Instructions \ Factory Overview \ Contact Us
© copyright 2007 Kalpatarudoors.com. All rights reserved.

Website design : Lotusmedia